ResMed - AirCurve™ 10 S BiLevel Machine with HumidAir™ Heated Humidifier
ResMed - AirCurve™ 10 S BiLevel Machine with HumidAir™ Heated Humidifier is available to buy in increments of 1
The AirCurve™ 10 S BiLevel Machine with HumidAir™ Heated Humidifier by ResMed is a cutting-edge unit designed to offer comfort through intuitive technology.
The AirCurve™ 10 S BiLevel Machine with HumidAir™ Heated Humidifier operates on a set, higher pressure for inspiration and a set, lower pressure for expiration. The machine's comfort features are designed to help the user adjust to the two delivered pressures. This is a bilevel machine delivering one pressure for inhalation and one for exhalation while monitoring the length of the breaths and responding to alter the timing as needed to maintain the respiratory cycle. Features:-Easy-Breathe ComfortIs designed to imitate a more natural breathing pattern. At the point of transition between the two pressures, a waveform of increasing and decreasing pressure is released to encourage a natural resting breath.-Built-In HumidAir™ Heated Humidifier Has a fully integrated humidifier built-in to the machine to supply moisture and a warmer temperature throughout the hose to increase therapy comfort. Using the My Options screen on the machine, the humidification level is easy to set. Numbers 1 through 8 are listed on the screen, 1 represents the lowest level of humidification, and 8 represents the highest. The humidifier is not required for therapy, so it may be turned off if it is not desired.-TiControl and Adjustable Rise Time Monitors the pattern of inhalation and exhalation, comparing it against the TiMax and TiMin settings on the machine. Those with respiratory disorders such as COPD or obstructive lung disease may experience early or delayed changes from inspiration to expiration, referred to as cycling. The 10 S BiLevel TiControl feature is designed to prevent cycling by setting a minimum and maximum time limit on inspiration.When the machine detects the user breathing which falls outside the machine settings, it will intervene to alter the timing of the delivered IPAP (inhalation) or EPAP (exhalation) pressure. TiControl Settings: Ti Max: Maximum length of Inhalation Ti Min: Minimum length of Inhalation Trigger: Sensitivity level for inhalation trigger Cycle: Sensitivity level for exhalation The AirCurve 10 S machine does spontaneously regulate the breathing pattern to avoid cycling which results in inefficient breathing. This machine DOES NOT deliver a breath on a timed basis. This machine is NOT a BiLevel ST machine and DOES NOT have a back up rate setting.-LCD Displays with My OptionsThe menus are designed to be easy to read and use. Select the menu item on the screen by turning the easy grip dial.-Enhanced Vsync Technology If changes occur in mask pressure or the seal of the mask, Vsync technology is established to quickly detect the leak. Vsync leak management is developed by ResMed to track and control leakage and to relay accurate data in the instance that a leak arises. The goal is to provide the user with a factual estimation of airflow. Likewise, the differences in lung capacity can be determined by the Trigger and Cycle Sensitivity feature. The level selected reflects the respiratory effort of the user -SmartStart / SmartStop Component automatically starts the device when the user breathes into the mask.The SmartStop™ component stops the device when the user removes the mask.-SD Card and Data Storage Records the information about the sleep therapy, which can be downloaded onto an SD Card. The SD Card is installed in the machine at the time of shipment and must be in the machine before it is used. The machine's on board memory holds compliance information for 365 sessions of use as well as detailed data for 30 sessions.
©ResMed 2014 Used with Permission.
Specifications | This Product Include: -BiLevel Machine-Built-In HumidAire Heated Humidifier-Standard Water Chamber -6 Ft SlimLine Tubing-15mm Diameter -Power Supply and Cord-Travel Bag- 1 Standard Filter (Installed)-Filter Cover-SD Card Inserted in Machine-Patient Manual |
---|
Write Your Own Review