F&P myAIRVO™ 2 Humidifier with integrated flow generator

In stock
SKU PT100US

$4,800.00

Introducing the F&P myAIRVO™ 2, delivering airway hydration and respiratory support with a focus on comfort and ease of use. The myAIRVO 2 has been designed specifically to be an integrated solution for delivering nasal high flow with Optiflow™.
 

 

Introducing the F&P myAIRVO™2, delivering airway hydration and respiratory support with a focus on comfort and ease of use. The myAIRVO 2 has been designed specifically to be an integrated solution for delivering nasal high flow with Optiflow™. Fisher & Paykel Healthcare’s leading humidification technology allows the myAIRVO 2 to comfortably provide high flows of air/oxygen mixtures to spontaneously breathing patients, through the unique Optiflow nasal cannula or tracheostomy interfaces.

1.Adjustable Temperature and Flow Settings·Three temperature settings (37, 34, 31°C) to help achieve comfort and compliance·Integrated flow generator delivers a wide flow range (2-60 L/min) for a wide range of patients. No wall air supply is required.

2.AirSpiral™Heated Breathing Tube·Utilizes an advanced two-spiral design to help protect against condensate·2-in-1 tube that connects to both Optiflow™and Optiflow Junior interface·No separate temperature probes or heater-wire adapters required

3.Optiflow™Nasal &Tracheostomy Interfaces·Evaqua™technology reduces formation of mobile condensate·Soft, flexible prongs contoured to the patient’s nose·Wide-bore design reduces gas jetting

4.Supplemental Oxygen·Oxygen can be added from a wall supply or concentrator·Built-in ultrasonic oxygen analyser requires no calibration, service or replacement

 

Supplementary oxygen (when required)

· FiO2 21% to 100%

· Inbuilt ultrasonic oxygen analyzer requires no calibration, service or replacement

 

Heated breathing tube

Dual spiral heater wires and unique integrated temperature sensor

 

Integrated temperature sensor

No external probes, cables or adaptors required

 

Water vapor vs. droplets

The F&P myAIRVO™ 2 humidifieris designed to generate water vapor (molecules)

Nebulizers and other aerosol delivery systems are designed to generate water droplets. Unlike water vapor, the droplets are large enough to carry pathogens.

Introduction

Setup

Use

Cleaning

More Information
Specifications

 

 Specifications:
 
 
-Dimensions:
295 mm x 170 mm (11.6"x 6.7"x 6.9")
-Weigth:
2.2 kg (4.8 lb)-unit only
3.4 kg (7.5 lb)-packaged in bag incl.accesories
-Electric ratings:
 50-60 Hz
100-115 v - 2.2 A (2.4 A max)
220-240 v - 1.8 A (2.0 A max)
-Flow Settings:
10 to 60 L/min in increments of 5 L/min (default)
2 to 25 L/min in incremebts of 1 L/min in (junior mode)
 
-This Product include:
-1 each Humidifer/Blower
-1 each HC360 chamber
-1 each breathing tube 
-1 each power cord
-1 each funnel and 2 each replacement filters.
 
Write Your Own Review
You're reviewing:F&P myAIRVO™ 2 Humidifier with integrated flow generator
© 2018 Spec Medical, Inc All Rights Reserved Medical Supply SEO