PR System One REMStar 60 Series BiPAP Pro with Bi-Flex

In stock
Reference Only


PR System One REMStar 60 Series BiPAP Pro with Bi-Flex combine the proven comfort and therapy


The PR BiPAP Pro with Bi-Flex is an intelligent solution that knows when, why, and how changes should occur to consistently and effectively provide optimum sleep therapy. New System One technologies like Humidity Control with Dry Box and Resistance Control for use with any mask, all are helping users achieve effective therapy.

-Bi-Flex Family Technology
 Maintains effective therapy at comfortable pressures to enhance traditional BiPAP treatment. A machine with Flex Technology which uses a natural breath-by-breath  pattern makes adapting to BiPAP therapy easier for new users than with a traditional BiPAP machine.PR BiPAP Pro to track each breath and provide pressure relief  during three critical points in the breathing cycle making for a more natural breathing cycle.
-Heated Tube Humidifier with Heated Tube
 Updated to increase the surface area for optimum humidification, the optional System One 60 Series Heated Tube Humidifier with Heated Tube offers leading edge  comfort,analyzing the ambient room temperature and machine airflow, the level of relative humidity delivered to the mask is adjusted to maintain the desired  temperature  evenly from the machine to the mask.System One Dry Box technology reduces the chance of water damage to the CPAP
-System One Resistance Control
 considers the mask during treatment allowing PR machines to reach optimal pressure. Accuracy and reliability are achieved by instructing the device to compensate  for  the specific mask type using a numbering system to include the mask resistance in the therapy settings
-Advanced Event Detection
 can detect the breathing cycle and report any variation in breathing patterns, increasing therapy effectiveness
-On Screen Data
 has sleep data available on the display screen including the Apnea/Hypopnea Index, leak rate as well as the 7 and 30 day average pressure readings.  Data is stored  in  both an on-board memory and a generic SD memory card.
More Information
 This Product Include:
-BiPAP Pro
-Power Supply and Cord
-Carrying Case
-SD Memory Card -Reusable Foam Filter (2)
-Patient Manual
-Clinical Quick Setup Guide

-Pressure Range 4-25 cm H2O (.5 increments)
-Ramp Time: 0 to 45 min. (5-min. increments)
-Starting Ramp Pressure: 4 to EPAP; patient-adjustable
-Dimensions: 7" L x 5.5" W x 4" H 18 cm L x 14 cm W x 10 cm H
-Weight: 3 lbs / 1.36kg
-Dimensions of 60 Watt Power Supply (For Use Without Heated Tube)
-Not Including Cord or Plug: 4.75 in x 2.75 in x 1.75 in
-Dimensions of 80 Watt Power Supply (For Use With Heated Tube) - Not Including Cord or Plug: 6 in x 2.75 in x 1.75 in
-Altitude Compensation: Automatic - Maximum height 7500 feet. -Filters: Foam and optional ultra-fine
-Device Set-Up: LCD/Control Wheel or Encore Software
Call For Price

For Reference Only

Write Your Own Review
You're reviewing: PR System One REMStar 60 Series BiPAP Pro with Bi-Flex
© 2018 Spec Medical, Inc All Rights Reserved Medical Supply SEO